    |
|
 |
|
Accessories
|
| N° item | Designation |
 105-11.000 |
Bed for rear drive Weight: 54.000 kg |
 105-15.000 |
Bed for underneath drive Weight: 50.000 kg |
 102-91.000 |
Hand rest Weight: 1.600 kg |
 102-91.100 |
T-support width 45mm Weight: 0.100 kg |
 102-91.110 |
Rectangular sawing table Weight: 0.350 kg |
 105-90.000 |
Fixed steady with 3 bronze jaws Weight: 2.500 kg |
 105-90.200 |
Fixed steady with 3 roller type
jaws Weight: 3.500 kg |
 105-90.220 / 105-90.210 |
Set of 3 roller type jaws 105-90.210 : Without automatic release Weight: 0.650 kg |
 102-10.120 |
Tool tray Weight: 1.800 kg |
 105-23.000 / 105-30.000 |
Open headstock for W collets 105-23.000: W20 105-30.000: W25 Weight: 25.800 kg |
 105-24.000 / 105-31.000 |
Close headstock for W collets 105-24.000: W20 105-31.000: W25 Weight: 26.000 kg |
 105-21.600 / 105-26.600 105-30.600 / 105-32.600 |
Manually controlled lever-operated quick-closing
attachment 105-21.600/105-26.600: W20 105-30.600/105-32.600: W25 Weight: 7.300 kg |
 102-30.510 |
Manual drawbars W25 without 1:5
reduction unit, for W25 / W20 reduction bush X= 227.5 mm Weight: 0.850 kg |
 102-32.510 |
Manual drawbars W25 with 1:5 reduction unit, for
W25 / W20 reduction bush X= 299.5 Weight: 0.950 kg |
 102-21.050 / 102-30.010 |
Manual drawbars W without 1:5 reduction unit 102-21.050: W20 / x= 217.5mm 102-30.010: W25 / x= 211.5mm Weight: 0.800 kg |
 102-26.035 / 102-32.010 |
Manual drawbars W with 1:5 reduction
unit 102-26.035: W20 / x= 289.5mm 102-32.010: W25 / x= 2283.5mm Weight: 0.800 kg |
 105-30.615 |
Drawbars for quick-closing attachments W25 without
1:5 reduction unit, for W25 / W20 reduction bush X= 307.5 mm Weight: 0.900 kg |
 105-30.610 |
Drawbars for quick-closing attachments W25 with 1:5
reduction unit, for W25 / W20 reduction bush X= 307.5 mm Weight: 0.900 kg |
 105-21.605 / 105-30.605 |
Drawbars for quick-closing attachments
W without 1:5 reduction unit 105-21.605: W20 / x= 303.5mm 105-30.605: W25 / x= 291.5mm Weight: 0.850 kg |
 105-26.610 / 105-32.610 |
Drawbars for quick-closing attachments W with 1:5
reduction unit 105-26.610: W20 / x= 375.5mm 105-32.610: W25 / x= 363.5mm Weight: 1.000 kg |
 102-22.500 / 102-31.500 |
Hand wheel for manual control of spindle W 102-22.500: W20 102-31.500: W25 Weight: 1.300 kg |
 105-21.800 / 105.30.800 |
Perforated-disc dividing attachment for
W delivered with 4 discs 105-21.800: W20 105-30.800: W25 Weight: 4.000 kg |
 102-20.001 / 102-25.001 |
60° male centre, hardened steel, shank type
W 102-20.001: W20 102-25.001: W25 Weight: 0.450 kg |
 102-20.002 / 102-25.002 |
60° male centre, tungsten carbide, shank type
W 102-20.002: W20 102-25.002: W25 Weight: 0.500 kg |
 102-20.005 / 102-25.005 |
60° female centre, hardened steel,
shank type W 102-20.005: W20 102-25.005: W25 Weight: 0.220 kg |
 102-20.045 / 102-25. 024 |
Drill chuck on W arbor with automatic gripping 102-20.045: W20 102-25.024: W25 Weight: 1.200 kg |
 102-20.021 / 102-25. 021 |
Arbor for drill chuck 102-20.021: W20 102-25.021: W25 Weight: 0.400 kg |
 102-20.275 / 102-20.276 |
Centre bushes, shank type W20 102-20.275: Morse 1 102-20.276: Morse 2 Weight: 0.130 kg |
 102-20.025 |
Cutter arbores, shank tape W20, Ø10 x 15 Weight: 0.270 kg |
 102-25.025 |
Cutter arbores, shank tape W25, Ø10 x 15 Weight: 0.270 kg |
 102-20.081 / 102-25.081 |
6-jaw chuck, Ø100mm on W arbor, for external clamping 102-20.081: W20 102-25.081: W25 Weight: 1.250 kg |
 102-20.082 / 102-25.082 |
6-jaw chuck, Ø100mm on W arbor, for internal
clamping 102-20.082: W20 102-25.082: W25 Weight: 1.500 kg |
 102-20.080 / 102-25.080 |
6-jaw chuck, Ø100mm on W arbor, for external
and internal clamping 102-20.080: W20 102-25.080: W25 Weight: 1.500 kg |
 399901013 |
6 jaw for external clamping, for 102-20.080-81-82 : W20 102-25.080-81-82 : W25 Weight:0.250 kg |
 399901014 |
6 jaw for internal clamping, for 102-20.080-81-82 : W20 102-25.080-81-82 : W 25 Weight:0.250 kg |
 102-21.225 / 102-30.225 |
Adjustable depth stop 102-21.225: W20 102-30.225: W25 Weight: 0.080 kg |
 102-20.180 / 102-25.180 |
Protective nut for W spindle nose 102-20.180: W20 102-25.180: W25 Weight: 0.260 kg |
 102-20.185 / 102-20.186 / 102-25.185 |
Sleeve blank for W spindle 102-20.185: W20/ Ø60x58 mm 102-20.186: W20/ Ø60x100 mm 102-25.185: W25/ Ø70x80 mm Weight: 1.950 kg |
 102-20.060 / 102-25.060 |
Chuck adapter plates 102-20.060: W20/ Ø111 mm 102-25.060: W25/ Ø111 mm Weight: 1.500 kg |
 102-20.064 / 102-25.064 |
3-jaw chucks 102-20.064: W20 / Ø100mm 102-25.064: W25 / Ø100mm Weight: 4.000 kg |
 102-20.096 / 102-25.096 |
High precision 3-jaw chucks 102-20.096: W20 / Ø100mm 102-25.096: W25 / Ø125mm Weight: 3.800 kg |
 102-20.073 |
Soft jaws for 3-jaw chucks for chucks 102-20.064 /
102-20.066 / 102-25.064 Weight: 0.380 kg |
 102-20.067 / 102-25.067 / 102.25.084 |
4-jaw self- centring chucks for spindle
type W 102-20.067: W20 / Ø100mm 102-25.067: W25 / Ø100mm 102-25.084: W25 / Ø125mm Weight: 4.100-7.500 kg |
 102-20.070 / 102-25.073 |
3-jaw extra-flat chucks 102-20.070: W20 / Ø110mm 102-25.073: W25 / Ø125mm Weight: 2.800-4.300 kg |
 102-20.087 / 102-25.074 |
Set of 3 soft jaws 102-20.087: for 102-20.070 102-25.074: for 102-25.073 Weight: 0.380 kg |
 102-20.068 / 102-25.068 |
4-jaw independent chucks with
self-centring for spindle W 102-20.068: W20 / Ø110mm 102-25.068: W25 / Ø110mm Weight: 5.000 kg |
 102-20.072 / 102-25.072 |
Magnetic chucks for spindle type W 102-20.072: W20 / Ø100mm 102-25.072: W25 / Ø100mm Weight: 5.000 kg |
 102-20.110 / 102-25.110 |
Faceplate Ø200 mm with three radial T-slots
and tapped holes 102-20.110: W20 102-25.110: W25 Weight: 4.900 kg |
 102-20.150 |
Clamps Weight: 0.210 kg |
 102-20.160 |
Raised clamp Weight: 0.100 kg |
 102-20.131 |
Hardened driving dogs 102-20.131: for Ø 6.5
mm 102-20.132: for Ø 8.0 mm 102-20.133: for Ø 10.0 mm 102-20.134: for Ø 12.5 mm 102-20.135: for Ø 16.0 mm 102-20.136: for Ø 20.0 mm 102-20.137: for Ø 25.0 mm 102-20.138: for Ø 30.0 mm Weight: 0.270 kg max. |
In view of the constant improvements made to our
products, technical data, illustrations, dimensions and
weights are subject to change without notice.
