| Capacities |
|
| Maximum turning diameter |
200 mm |
| Maximum swing over carriage |
115 mm |
| Height of centres over carriage |
60 mm |
| Turning length |
400 mm |
| |
|
| Headstock |
|
| Spindle speed |
50 - 5000 min-1 min |
| With quick clamping direct AC motor drive |
4000 min-1 min |
| Power |
4 kW |
| Max. torque |
26 Nm |
| Spindle nose |
Camlock D1-3" |
| Max. throughbore with collet |
24 mm |
| Max. throughbore with jaw chuck |
27 mm |
| Spindle for Schaublin SA collets |
B32 |
| |
|
| Apron and carriage |
|
| Transverse stroke: X-axis |
140 mm |
| AC motor drive, nominal torque |
2.9 Nm |
| Ball screw, Ø x pitch |
20 x 5 mm |
| Longitudinal stroke: Z-axis |
400 mm |
| AC motor drive, nominal torque |
2.9 Nm |
| Ball screw, Ø x pitch |
20 x 5 mm |
| Resolution, on radius |
0.0005 mm |
| |
|
| Tailstock |
|
| Spindle taper |
MORSE 2 |
| Spindle longitudinal stroke |
100 mm |
| |
|
| Starwheel-operated tailstock |
|
| in option |
MORSE 3 |
| |
|
| Milling device |
|
| in option |
|
| |
|
| Feeds |
|
| Working feeds, X-/Z-axis, stepless |
0-5000 mm/min |
| Rapid feed, X-/Z-axis |
7.5 m/min |
| Feed power, X-/Z-axis |
500 daN |
| |
|
| Tooling system linear |
|
| Radial |
2 |
| Frontal |
2-5 |
| Collets holder |
ESX 20 |
| Bar holder Ø |
20 mm |
| MULTIFIX system |
16 x 16 |
| |
|
| Coolant supply in option |
|
| Capacity of coolant tank |
55 l |
| Pump power |
10 l/min |
| Pressure |
1.7 bars |
| |
|
| Weight / Dimensions |
|
| Net weight |
1120 kg |
| Dimensions: length - width - height |
1600 x 1030 x 1650 mm |
| Loadfloor |
700 kg/m2 |
| |
|
| "The SCHAUBLIN MACHINES SA 225 High Precision Lathe
is in conformity with the European Community safety
regulations. In view of the constant improvements made
to our products, technical data illustrations,
dimensions, and weights appearing in this catalogue are
subject to change without notice." |
|
High precision lathe 
