    |
|
 |
|
Accessories
|
| N° item | Designation |
 70-10.000 |
Bed for rear drive: length 600mm / height 120mm Weight: 13.100 kg |
 70-12.000 |
Bed for underneath drive: length 600mm / height 120mm Weight: 16.300 kg |
 70-30.000 |
Open headstock for W12 collets Weight: 6.500 kg |
 70.31.000 |
Closed headstock for W12 collets Weight: 7.800 kg |
 70-91.000 |
Hand rest Weight: 0.250 kg |
 70-10.100 |
Fixing bolt Weight: 0.250 kg |
 70-91.100 |
T-support width 45mm Weight: 0.040 kg |
 70-91.110 |
Rectangular sawing table: 55mm x 40 mm Weight: 0.110 kg |
 70-90.000 |
Fixed steady with 3 bronze jaws Weight: 0.860 kg |
 70-33.500 |
Hand wheel for manual control of
spindle W12 Weight: 0.900 kg |
 70-21.800 |
Perforated-disc dividing attachment for W12
delivered with 4 discs Weight: 2.400 kg |
 70-32.030 |
Manual drawbar for W12, length 162mm Weight: 0.180 kg |
 70-30.625 |
Drawbar for quick-closing attachment
for W12 length 183mm Weight: 0.370 kg |
 70-30.600 |
Lever-operated quick-closing Weight: 1.900 kg |
 70-25.001 |
60° male centre, hardened steel Weight: 0.050 kg |
 70-25.005 |
60° female centre, hardened
steel Weight: 0.050 kg |
 70-25.023 |
Drill chuck on W12 arbor with automatic
gripping Weight: 0.200 kg |
 70-25.021 |
Arbor for drill chuck W12 Weight: 0.060 kg |
 70-25.080 / 70-25.081 / 70-25.082 |
6-Jaw chuck Ø100 on W12 arbor 70-25.080 : ext. and int. 70-25.081 : external 70.-25.082 : internal Weight: ~ 1.350 kg |
 70-25.025 |
Cutter arbors, shank tape W12 Weight: 0.090 kg |
 70-34.225 / 70-34.220 |
Combined adjustable extractor and stop 70-34.225 : W12 / 70-30.000 / 70-31.000 70-34.220 : W12 / 70-30.060 / 70-31.060 Weight: 0.100 kg |
 70-25.180 |
Protective nut for W12 Weight: 0.060 kg |
 70-30.225 |
Adjustable depth Stop Weight: 0.040 kg |
 70-25.110 |
Faceplate Ø138 mm with three radial T-slots and 21 tapped holes Weight: 1.400 kg |
 70-20.150 |
Clamps Weight: 0.050 kg |
 70-20.160 |
Raised clamp Weight: 0.100 kg |
 70-25.062 |
Chuck adapter plate Ø 85 mm Weight: 0.340 kg |
 70-25.064 |
3-jaw chuck with 2 sets of 3 jaws Weight: 1.200 kg |
 70-25.070 |
Extra flat 3-jaw chuck with 2 sets of 3 jaws Weight: 1.850 kg |
 70-25.073 |
Set of 3 soft jaws for chuck 70-25.064 Weight: 0.150 kg |
 102-20.131 |
Hardened driving dogs 102-20.131: for Ø 6.5 mm 102-20.132: for Ø 8.0 mm 102-20.133: for Ø 10.0 mm 102-20.134: for Ø 12.5 mm 102-20.135: for Ø 16.0 mm 102-20.136: for Ø 20.0 mm Weight: 0.110 kg max. |
In view of the constant improvements made to our
products, technical data, illustrations, dimensions and
weights are subject to change without notice.
|
Lathe Serie 70 70-CF bench 70-Mi bench 70-CF cast-iron Accessories Headstock / Bench Carriage Tailstock Home Products News Contact Links Site Map copyright © 1999 - 2009 - SCHAUBLIN MACHINES SA - disclaimer ascl.com 
 |